● POINTS D'ACCÈS
Affichage de 1–12 sur 41 résultats
-
GLinq
The IgniteNet GLinq is a powerful ethernet over coax converter that enables service providers to deliver gigabit speeds via existing and new coax cabling infrastructure. The GLinq system is ideal for both providing bandwidth to buildings with outdoor coax as well as delivering gigabit speeds within buildings using existing coax cabling infrastructure. Operators can already easily deliver gigabit speeds to customers wirelessly using IgniteNet’s 60GHz MetroLinq products – now they can also easily share that delivered capacity throughout the whole building. The unique GLinq + MetroLinq combination provides a clean, simple, fast installation of gigabit connections.
-
NFT 1N
The NFT 1N/ 1N AF are indoor WI-FI access points based on 802.11N technology with integrated
2.4 GHz (2×2) MiMo radios boasting an output power of 28 dBm. 3 Ethernet ports allow connecting
multiple devices to the access point. The NFT 1N model is powered with a 12-24V passive PoE
adapter and the NFT 1N AF model supports the 802.3af standard, which allows powering the
device using a PoE switch.OS
The indoor access point runs the Infi nity OS – a highly
functional and easy to use operating system. This powerful
and fl exible operating system ensures fl awless operation of
LigoWave hardware devices and effortless setup for those
deploying the networks.
• Responsive HTML 5 based GUI
• 128 concurrent clients
• 8 virtual networks (SSID+VLAN)
• IPv6 support
• WNMS compatible -
NFT 1N AF
The NFT 1N/ 1N AF are indoor WI-FI access points based on 802.11N technology with integrated
2.4 GHz (2×2) MiMo radios boasting an output power of 28 dBm. 3 Ethernet ports allow connecting
multiple devices to the access point. The NFT 1N model is powered with a 12-24V passive PoE
adapter and the NFT 1N AF model supports the 802.3af standard, which allows powering the
device using a PoE switch.OS
The indoor access point runs the Infi nity OS – a highly
functional and easy to use operating system. This powerful
and fl exible operating system ensures fl awless operation of
LigoWave hardware devices and effortless setup for those
deploying the networks.
• Responsive HTML 5 based GUI
• 128 concurrent clients
• 8 virtual networks (SSID+VLAN)
• IPv6 support
• WNMS compatible -
NFT 2ac
The NFT 2ac is a WI-FI access point based on 802.11ac technology with an integrated 2.4 and 5GHz (2×2) MiMo radios
with 27dBm output power. The gigabit Ethernet port with 802.3af/at support allows powering the device with PoE
switches. Two additional Gigabit Ethernet ports allow extending the network or connecting additional devices to the
access point. Small form factor (15cm only), sleek design and unique mounting bracket makes the NFT 2ac ideal for
indoor installations requiring cost-effective high-performance devices.Each device is configured via the user
interface individually. This method
is suitable for small networks not
requiring centralized management
and monitoring.
Standalone Integrated Controller
The master access point manages
and monitors other devices on the
same network. This controller-less
architecture is suitable for small to
medium size networks with up to 50
devices.
External Controller
A local or cloud-based controller is
used to manage and monitor the
devices allowing deployment of large
scale networks and management
using a single system. -
NFT 3ac
Higher Light:
The Infinity NFT 3ac is a high-performance dual-radio access point from LigoWave, equipped with two 3×3 MIMO
802.11ac radios operating in the 2.4 and 5GHz bands concurrently. A dedicated Qualcomm Atheros AR9558 CPU
(720MHz) makes this AP ideal for enterprise capacity demanding applications reaching 450Mbps data rate on a 2.4GHz
radio and 1300Mbps data rate on a 5GHz radio. There are two Gigabit Ethernet ports and one of them supports 802.3af/
at standard for easy and quick deployment using PoE switches.Integrated Security Radio
The NFT 3ac has an integrated dual-band radio dedicated
for security and RF management. It also allows doing
real-time spectrum analysis wthout any interuption to the
the main radios dedicated for access. (Note: the security
and RF management features will be supported in a future
firmware release).3 Ways to Use:
Standalone
Each device is configured via the user
interface individually. This method
is suitable for small networks not
requiring centralized management
and monitoringMaster AP
The Master device manages and
monitors other devices on the
same network. This controllerless
architecture is suitable for small to
medium size networks with up to 50
devices.Infinity controller
A local or cloud-based controller is
used to manage and monitor the
devices allowing deployment of large
scale networks and management
using a single system. -
NFT 3ac Lite
The Infinity NFT 3ac Lite is a high-performance dual-radio access point from LigoWave, equipped with two 3×3 MIMO
802.11ac radios operating in the 2.4 and 5GHz bands concurrently. A dedicated Qualcomm Atheros AR9558 CPU
(720MHz) makes this AP ideal for enterprise capacity demanding applications reaching 450Mbps data rate on a 2.4GHz
radio and 1300Mbps data rate on a 5GHz radio. There are two Gigabit Ethernet ports and one of them supports 802.3af/
at standard for easy and quick deployment using PoE switches.The Infinity Controller is an intuitive product and network management platform for your NFT devices. It allows easy,
simple, and fast network installation, configuration, and control, all of which can be performed using a web browser.
The Controller also facilitates network maintenance and expansion by automating these processes. The management
platform can function as an integrated controller or as an external one (i.e. Infinity Cloud Controller), thus serving as an
optimal solution for setting up and managing networks of any size.Easy Mesh
Easy Mesh is LigoWave’s solution to wireless network coverage expansion and device configuration automation. This
feature is designed for the NFT Series (as well as DLB devices utilizing NFT firmware) and is only available on the External
Infinity Controller.
The Infinity Controller allows users to set up an Easy Mesh network in a plain and simple way: just have at least one
LAN-connected AP, create a new Easy Mesh network, assign devices to it, and you are good to go! -
NFT Blizzard 2ac-90
NFT Blizzard robust access points are designed for professional outdoor hotspot scenarios in places such as camping grounds, warehouses, construction sites, ports and marinas.
The 2ac-90 is equipped with dual 2.4/5GHz 2×2 MIMO radios reaching 29dBm of output power to deliver a 1.167Gbps data rate. Devices feature 802.3af/at for simplified power-up using PoE switches.
Improved Noise Immunity
The metal casing works as a deflector that gets rid of interference and reduces noise when multiple devices are installed on the same pole. Apart from RF shielding, the metal IP67-rated housing works as a heatsink, allowing for better RF performance by dissipating the heat generated by the radio.
Surge Protection
NFT Blizzard devices comply with the IEC 61000-4-5 lightning and industrial surge protection standard (10/700µs pulse). 6kV line-to-ground and 2kV line-to-line protection allows for operation in harsh weather conditions and unstable electrical installations.
Design Built to Last
The NFT Blizzard 2ac-N access point & CPE is designed to withstand even the harshest weather conditions. Its anticorrosive IP-67-rated metal casing has proven to be a reliable solution for projects that need standardized IP equipment.
-
NFT Blizzard 2ac-N
The LigoWave NFT Blizzard 2ac-N is an outdoor Wi-Fi access point with integrated 2.4/5GHz 2×2 MIMO radios, boasting
output power of 29dBm. The Gigabit Ethernet port with 802.3af/at support allows users to power the device using PoE
switches.
The NFT Blizzard 2ac-N is specifically designed for cost-efficient, yet professional outdoor hotspot scenarios, including
campsites, hospitality, education, public Wi-Fi, and many more.
The IP67-rated enclosure, integrated surge protection, and professional mounting brackets ensure continuous operation
even in the harshest of weather conditions.Infinity Controller
The Infinity Controller is an intuitive product and network management platform for your NFT devices. It allows easy,
simple, and fast network installation, configuration, and control, all of which can be performed using a web browser.
The Controller also facilitates network maintenance and expansion by automating these processes. The management
platform can function as an integrated controller or as an external one (i.e. Infinity Cloud Controller), thus serving as an
optimal solution for setting up and managing networks of any size.Automated Device Onboarding
Automated device onboarding (ADO) is the process of
automatically setting up Infinity access points that are
introduced to the network. Not only does ADO eliminate
the discrepancies caused by manual setup, but it also
simplifies the deployment process and saves valuable
time.
Automated device onboarding requires one-time
configuration of the Cloud AP, after which the settings
are automatically applied to all Infinity access points that
are newly-connected to the network using a physical
connection.
Flexible Network Scaling
The External Infinity Controller is designed with various
types of networks in mind, whether they contain just a few
access points or thousands of them.
Networks can be categorized into different logical groups
(up to 4 layers) based on geographical location, service
type, company branch, or other criteria. Each group can
have different configurations assigned to them and access
points can easily migrate between networks.
Furthermore, the External NFT Controller (installed on
customer premises) supports multiple organizations
simultaneously (many network owners).Pay as You Grow
A cloud-based Infinity Controller account is free and
supports a network of up to 10 Infinity wireless access
points, but can be expanded as the business grows. Learn
more about the paid version here.
IP Session Logging
Infinity access points allow users to track and log end-
user credentials (source/destination IPs and ports, MAC
address, etc.) on the Internet, thus allowing a safer and
transparent Internet service.Predefined Scenarios for Your Applications
The Infinity Controller provides an array of features, collectively forming the optimal solution for multiple scenarios, e.g.
a complete any-size office access point network, small café or shop hotspot, and an Easy Mesh application, which is
popular among small hotels, schools, and hospitals.Easy Mesh
Easy Mesh is LigoWave’s solution to wireless network coverage expansion and device configuration automation. This
feature is designed for the NFT Series (as well as DLB devices utilizing NFT firmware) and is only available on the External
Infinity Controller.
The Infinity Controller allows users to set up an Easy Mesh network in a plain and simple way: just have at least one LAN-
connected AP, create a new Easy Mesh network, assign devices to it, and you are good to go!Proximity
LigoWave access points have an integrated mobile device detection feature. This means that any device within range
can be logged using the MAC address and date/time without any user interaction.
The data is exported in real time and can be used to improve the services of an enterprise or managed service provider
by importing them into proprietary applications for analytics and insights. An API is available upon request.
Several of LigoWave’s technological partners are already using this functionality. For more information, go to the
LigoWave Technological Partners page at ligowave.com/technological-partners.