BSP-360

Physical Port

• 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE injector function (Port 1 to Port 4)
• RJ45 type interface for basic management and setup
• USB type A female for setting file backup and restoration

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE management
  • Total PoE power budget control
  • Per port PoE function enable/disable
  • PoE port power feeding priority
  • Per PoE port power limitation
  • PD alive check
  • PoE schedule

Battery Management

• Battery type option: Lithium battery or lead-acid battery
• Easy diagnostic of the system operating status via LED indicator
• Current battery usage status
• Low voltage cut-off protection: Send alert and cut off power when  the battery is low
• MPPT (Maximum Power Point Tracking) Charge Controller
  • Reverse current protection to prevent the current circuits from flowing back to the PV panel
  • Over-current protection
  • Reverse polarity protection (for battery and charging electrodes)

Industrial Case and Installation

• IP30 aluminum case
• DIN-rail and wall-mounted designs
• Supports -10 to 60 degrees C operating temperature
• Supports ESD 6KV DC Ethernet protection
• Redundant power supply
• 24V~45V DC wide power input

Switching

• Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 8K MAC address table size
• Automatic address learning and address aging

Router

• Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP
• Static and dynamic (RIP1 and 2) routing
• IP/MAC-based bandwidth control
• Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications
• 802.1d STP and IGMP Proxy

Security 

• Port filtering allows which application can access the Internet.
• MAC filtering allows you to include or exclude computers and devices based on their MAC address
• URL filtering allows you to control access to Internet websites in an URL list
• IP source guard prevents IP spoofing attacks
• DoS attack prevention

Management

• Switch Management Interface
  • IPv4 Web switch management
  • SNMP v1, v2c
• Static and DHCP for IP address assignment
• System Maintenance
  • Firmware upload/download via HTTP
  • Configuration upload/download through HTTP
  • Hardware-based reset button for system reboot or reset to factory default
• Network Time Protocol
• SNMP trap for  Link Up and Link Down notification
• Event message logging to remote syslog server
• Supports PLANET ONVIF IP camera and snapshot function
• PLANET Smart Discovery Utility
• Supports PLANET NMS-360 Network Management Controller