LigoBASE 5-N

LigoPTMP series point to multipoint system delivers
600+ Mbps throughput via its unique and powerful RF

design that supports up to 256QAM modulation and

31 dBm output power. 1.2 GHz dedicated CPU ensures

swift data processing and high packet per second rate

(PPS) which is important for real time data transmission

applications. Equipped with two Gigabit Ethernet ports,

one with PoE passthrough, the unit allows powering and

connecting two devices on the tower (another LigoBASE

or IP camera). LigoBASE incorporates integrated surge and

ESD protection according to IEC standards passing Class

4 requirements. Additionally, weatherproof IP-67 standard

rated enclosure design allows using the equipment in any

climate conditions.

LigoWave OS

The full featured operating system makes LigoPTMP

devices ideal not only for WISPs and operators, but also for

security, enterprise or industrial applications. Proprietary

data transmission protocol (W-Jet V) ensures smooth

performance even in noisy areas at the same time delivering

high capacity, low latency and high packet per second

rate. QoS (quality of service) mechanism allows prioritizing

mission critical data and efficiently transmitting voice, video

or other real time data over the wireless network. Essential

tools like spectrum analyzer, site survey, antenna alignment

and others are included.

Comparer
Catégories : ,

Description

Hightlights:

Radio
Wireless protocol W-Jet V

Radio mode MIMO 2×2

Frequency range 4.900 – 6.100 GHz (FCC: 4.940 – 4.990 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz)

Channel size 5, 10, 20, 40, 80 MHz

Modulation schemes OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)

Data rates @ 80 MHz 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps

Duplexing scheme TDD

Error correction BCC, LDPC

Modulation, Mbps
866 780 650 585 520 390 260 195 130 65
TX Power, dBm
25 26 26 27 27 28 29 30 30 31
Receive sensitivity, dBm
-71 -73 -77 -79 -80 -84 -87 -92 -94 -97
Antenna

LigoBASE 5-90 Integrated 17 dBi dual-pol 90 degree sector antenna

LigoBASE 5-N 2 N-type connectors

Wired

First Interface 10/100/1000 Base-T with PoE IN (RJ-45)

Second Interface 10/100/1000 Base-T with PoE OUT (RJ-45)

Physical

Dimensions without mount:

LigoBASE 5-90 Length 389 mm (15.3‘’), width 174 mm (6.8‘’), height 51 mm (2‘’)

LigoBASE 5-N Length 399 mm (15.7‘’), width 174 mm (6.8‘’), height 47 mm (1.8‘’)

Mount length till pole 124 mm (4.8‘’)

Weight including mount
:
LigoBASE 5-90 2.77 kg (6.1 lb)

LigoBASE 5-N 3 kg (6.6 lb)

Power

Power input method, voltage PoE 802.3af, isolated 42 – 57 VDC

Power consumption (max) 8.6 W

Power output method, voltage PoE 802.3af, 48 VDC, 12.95W maximum

PoE inserter and AC/DC adapter are included

Environmental

Operating temperature -40°C (-40 F) ~ +65°C (+149 F)

Humidity 0 ~ 90 % (non-condensing)
.

Software features
Wizard for fast link setup
Centralized control from LigoBASE: A) Common wireless link parameters; B) Individual LigoSU parameters
Smart Auto-channel
Robust data security
QoS with hardware acceleration
Spectrum analyzer
Wireless signal and device state indication on RGB LEDs
Dual firmware image
Management

Dedicated 2.4 GHz radio for management

System monitoring SNMP, GUI/HTTP(S), Shell/SSH

System configuration GUI/HTTP(S)

Regulatory

Certification FCC/IC/CE

Antenna specifications

Frequency range 4.9 – 5.9 GHz
Gain
17 dBi
Polarization
Dual linear
Cross-pol Isolation
24 dBi
VSWR
<1.7
Azimuth beamwidth (H pol)
90 deg
Azimuth beamwidth (V pol)
90 deg
Elevation beamwidth
20 deg

Brand info