LigoWave’s DLB 2-14n delivers the highest performance and stability available in the 2.4 GHz CPE class. This product combines a highly advanced radio core containing MIMO 2×2 technology with an integrated, high-gain, dual polarization directional
antenna. The feature-rich operating system is optimized for ultra-high performance wireless communications while optionally
allowing compatibility with older 802.11 b/g standards devices.
The smart dynamic polling based protocol (iPoll 3) ensures reliable communication even in congested areas with 64 client
devices connected to a base-station.
Equipped with LigoWave’s dual firmware image feature, remote software upgrades are assured even if a power failure interrupts
the process. The device will restart using the prior firmware in the event of an upgrade failure.
The enclosure is made of polycarbonate plastic with UV inhibitors to provide years of outdoor exposure in direct sunlight
without cracking. The DLB 2-14n was designed and tested to meet an IP-66 rating as well as vibration, temperature, drop,salt, fog, and electrical surge standards to ensure a high level of reliability unsurpassed in the industry. It is equipped with agrounding lug and a grounded 24-volt PoE to allow a professional installation, resistant to electrical surges.

Catégories : ,


WLAN standard IEEE 802.11 b/g/n, iPoll (proprietary)
Radio mode MIMO 2×2

Radio frequency band 2.412 – 2.462 GHz (FCC 2.412 – 2.462 GHz)

Transmit power Up to 31 dBm (country dependent)

Receive sensitivity Varying between -96 and -74 dBm depending on modulation

Channel size 5,10, 20, 40 MHz

Modulation schemes 802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)

802.11 b: DSS (CCK, DQPSK, DBPSK)

Data rates 802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps

802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps

802.11 b: 11, 5.5, 2, 1 Mbps

Error correction FEC, Selective ARQ

Duplexing scheme Time division duplex

Type Integrated directional dual – polarized panel

Gain 14 dBi


Interface 10/100 Base-T, RJ45

Brand info