LigoDLB 6ac

The LigoDLB 6 Series—an extension of the time-tested LigoDLB line of wireless data transfer devices—empowers users
to deliver superb connectivity over 6GHz frequencies. The 6GHz band provides more leg room for all types of wireless

networks, allowing users to find minimally crowded channels, experience less noise and interference, and achieve greater

range and throughput.

Technical Description
Equipped with a 750MHz QCA 9563 CPU, a QCA 9882

radio, and 64MB RAM/16MB Flash Memory, the LigoDLB

6ac brings efficiency to the next level.

The state-of-the-art RF design supports external antennas

over N-Connectors, thus ensuring great output power,

providing improved range, and enabling high-capacity

transmission over 256-QAM.

+500Mbps of throughput—the result of a powerful

hardware platform with an 802.11ac technology-based

radio and the LigoWave iPoll 3 Proprietary Protocol.

iPoll 3: Enhanced Performance
Protocol

LigoWave’s iPoll 3™ PTMP proprietary protocol is an

innovative solution, eliminating transmission congestion

and close-cluster interference created in wireless PTMP

installations.

It works by having a DLB base station poll all connected

DLB CPE within the network, after which the base station

sends a data frame and a token to one CPE, signifying that

it can now send a data frame back to the base station. The

base station then waits for that one CPE to send a data

frame, and only having successfully received it, moves on

to poll all CPE and to perform the same process again.

The iPoll smart polling technology handles the activity of

all connected equipment to ensure transmission efficiency

by having DLB CPE that require less airtime listed as low

activity or idle and having CPE that generate more traffic

assigned to the active list.

This way, iPoll provides improved latency, avoids data

traffic collisions, and allows more CPE to be connected to

the base station simultaneously.

Comparer
Catégories : ,

Description

Hightlights:

Distance Recommendation PTMP Mode PTP Mode
LigoDLB 6ac
Antenna-Dependent 15km / 9.32mi
Wireless

WLAN Standard IEEE 802.11a/n/ac, iPoll 3

Radio Mode 2×2 MIMO

Radio Frequency Band 6GHz Models: 5.9–6.4GHz

Transmit Power Up to 30dBm (Country-Dependent)

Channel Size 5, 10, 20, 40, 80MHz

Modulation Schemes 802.11a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)

802.11ac: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)

Data Rates 802.11ac @ 40MHz: 400, 360, 300, 270, 240, 180, 120, 90, 60, 30Mbps

802.11ac @ 80MHz: 866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps

Error Correction FEC, LDPC

Duplexing Scheme Time Division Duplex

40MHz
Modulation, Mbps 400 360 300 270 240 180 120 90 60 30
TX Power, dBm
26 27 28 29 30 30 30 30 30 30
Receive sensitivity, dBm
-70 -72 -76 -78 -80 -84 -87 -92 -94 -95
80MHz
Modulation, Mbps 866 780 650 585 520 390 260 195 130 65
TX Power, dBm
24 25 25 26 27 28 28 29 29 29
Receive sensitivity, dBm
-64 -66 -70 -72 -74 -78 -81 -85 -88 -90

Antenna
Type N-Connectors for External Antenna

Gain Antenna-Dependent

Wired

Interface 10/100/1000 Base-T, RJ45

Physical

Dimensions Length 150mm (5.9‘’), width 115mm (4.5‘’), height 55mm (2.1‘’)

Weight 450g (1lb)

Mounting Combination Wall / Pole Mount with Quick-Swap Bracket

Power

Power Supply 24VDC Passive PoE (AC to 24VDC Adapter Included)

Power Source 100–240VAC

Max Power Consumption 10W

Environmental

Operating Temperature –40°C (–40°F) ~ +65°C (+149°F)

Humidity 0~90% (Non-Condensing)

Management

System Monitoring SNMP v3, Syslog, Web UI, Infinity Controller

Configuration Web UI, Infinity Controller

Regulatory

Certification IC/CE

Brand info