LigoPTP 6-N RapidFire

The LigoPTP RapidFire 6 — an extension of the time-tested LigoPTP line of wireless data transfer devices — empowers
users to deliver superb connectivity over 6GHz frequencies. The 6GHz band provides more leg room for all types of

wireless networks, allowing users to find minimally crowded channels, experience less noise and interference, and

achieve greater range and throughput.

Outstanding Capacity
RapidFire delivers an extremely high 700Mbps throughput via its unique and powerful RF design that supports up to

256-QAM modulation and 30dBm output power. Our proprietary W-Jet V protocol, specifically engineered for high

performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms.

Professional Design
In addition to achieving maximum performance, LigoWave focuses on delivering flexibility and ease-of-use in our

RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during

high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially

advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated

cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases

transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses

and signal levels (in 1dBm steps) when aligning the antenna.

Comparer
Catégories : ,

Description

Hightlights:

Antenna
LigoPTP 6-25 RapidFire Integrated Directional Dual-Pol 25dBi Panel

LigoPTP 6-N RapidFire 2 N-type Connectors

Wired

First Interface 10/100/1000 Base-T with PoE IN (RJ45)

Second Interface 10/100/1000 Base-T with PoE OUT (RJ45)

Physical

Dimensions without mount:

LigoPTP 6-25 RapidFire Length 379mm (14.9‘’), Width 387mm (15.2‘’), Height 51mm (2‘’)

LigoPTP 6-N RapidFire Length 399mm (15.7‘’), Width 174mm (6.8‘’), Height 47mm (1.8‘’)

Mount Length Till Pole 124mm (4.8‘’)

Weight including mount
:
LigoPTP 6-25 RapidFire 3.9kg (8.5lb)

LigoPTP 6-N RapidFire 2.9kg (6.3lb)

Power

Power Input Method, Voltage PoE 802.3at, Isolated 42–57VDC

Max Power Consumption 8.6W

Power Output Method, Voltage PoE 802.3af, 48VDC, 12.95W Maximum

PoE Inserter and AC/DC Adapter are Included

Environmental

Operating Temperature –40°C (–40°F) ~ +65°C (+149°F)

Humidity 0~90% (Non-Condensing)

Software features
Wizard for fast link setup
Centralized control from master: A) Common wireless link parameters; B) Individual slave parameters
Smart Auto-channel
Robust data security
QoS with hardware acceleration
Spectrum analyzer
Wireless signal and device state indication on RGB LEDs
Dual firmware image
Management

Dedicated 2.4GHz Radio for Management

System Monitoring STP/SNMP (V1), GUI/HTTP(S), Shell/SSH and Infinity Controller

System Configuration GUI/HTTP(S)

Regulatory

Certification FCC/IC/CE

Frequency Range 5.85–6.45GHz
Gain
25dBi
Cross-Pol Isolation
27dB
VSWR
<1.4
Azimuth Beamwidth (H-pol)

Azimuth Beamwidth (V-pol)

Elevation Beamwidth

Brand info