LigoPTP RapidFire 4-23

LigoDLB 2-90-16 PROLigoPTP RapidFire 4-N

Outstanding Capacity
RapidFire delivers an extremely high 140Mbps (20MHz channel) throughput via its unique and powerful RF design that
supports up to 256-QAM modulation and 26dBi output power. Our proprietary W-Jet V protocol, specifically engineered
for high performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms.

Professional Design
In addition to achieving maximum performance, LigoWave focuses on delivering flexibility and ease-of-use in our
RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during
high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially
advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated
cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases
transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses
and signal levels (in 1dBm steps) when aligning the antenna.

Ajoutez au devis

Comparer

Categories: WIFI, ● CPE (PTP/PMTP), ● CPE (PTP/PMTP), ● WIFI

Description
Brand info

Description

Hightlights:

Radio
Wireless protocol W-Jet V
Radio mode MIMO 2×2
Frequency range 4.940 – 4.990GHz
Channel size 5, 10, 20MHz
Modulation schemes OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
Data rates @ 20MHz 173, 144, 130, 116, 87, 58, 43, 29, 14Mbps
Duplexing scheme TDD
Error correction BCC, LDPC
Automatic Channel Selection DFS Compatability
Automatic TPC Supported
Modulation, Mbps 173 144 130 116 87 58 43 29 14
TX Power, dBm 21 21 22 22 23 24 25 25 26
Receive sensitivity, dBm -73 -77 -79 -80 -84 -87 -92 -94 -97
Antenna
LigoPTP 4-23 RapidFire Integrated directional dual-pol 23dBi panel
LigoPTP 4-N RapidFire 2 N-type connectors
Wired
First Interface 10/100/1000 Base-T with PoE IN (RJ45)
Second Interface 10/100/1000 Base-T with PoE OUT (RJ45)
Physical
Dimensions without mount:
LigoPTP 4-23 RapidFire Length 379mm (14.9‘’), width 387mm (15.2‘’), height 51mm (2‘’)
LigoPTP 4-N RapidFire Length 399mm (15.7‘’), width 174mm (6.8‘’), height 47mm (1.8‘’)
Mount length till pole 124mm (4.8‘’)
Weight including mount:
LigoPTP 4-23 RapidFire 3.9kg (8.5lb)
LigoPTP 4-N RapidFire 2.9kg (6.3lb)
Power
Power input method, voltage PoE 802.3at, isolated 42 – 57 VDC
Power consumption (max) 8.6W
Power output method, voltage PoE 802.3af, 48 VDC, 12.95W maximum
PoE inserter and AC/DC adapter are included
Environmental
Operating temperature –40°C (–40F) ~ +65°C (+149F)
Humidity 0 ~ 90 % (non-condensing)

Software features
• Wizard for fast link setup
• Centralized control from master: A) Common wireless link parameters; B) Individual slave parameters
• Smart Auto-channel
• Robust data security
• QoS with hardware acceleration
• Spectrum analyzer
• Wireless signal and device state indication on RGB LEDs
• Dual firmware image
Management
Dedicated 2.4GHz radio for management
System monitoring SNMP, GUI/HTTP(S), Shell/SSH and WNMS
System configuration GUI/HTTP(S) and WNMS
Regulatory
Certification FCC/IC/CE

Internal antenna
Frequency range 4.9 – 5.9GHz
Gain 23dBi
Polarization Dual linear
Cross-pol Isolation 27dBi
VSWR 1.5:1
Azimuth beamwidth (H pol) 6°
Azimuth beamwidth (V pol) 7°
Elevation beamwidth 9°