LigoPTP RapidFire 4-N

HighLights:

Outstanding Capacity
RapidFire delivers an extremely high 140Mbps (20MHz channel) throughput via its unique and powerful RF design that

supports up to 256-QAM modulation and 26dBi output power. Our proprietary W-Jet V protocol, specifically engineered

for high performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms.

Professional Design
In addition to achieving maximum performance, LigoWave focuses on delivering flexibility and ease-of-use in our

RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during

high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially

advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated

cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases

transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses

and signal levels (in 1dBm steps) when aligning the antenna.

Comparer
Categories: ,

Description

Radio
Wireless protocol W-Jet V

Radio mode MIMO 2×2

Frequency range 4.940 – 4.990GHz

Channel size 5, 10, 20MHz

Modulation schemes OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)

Data rates @ 20MHz 173, 144, 130, 116, 87, 58, 43, 29, 14Mbps

Duplexing scheme TDD

Error correction BCC, LDPC

Automatic Channel Selection DFS Compatability

Automatic TPC Supported

Modulation, Mbps
173 144 130 116 87 58 43 29 14
TX Power, dBm
21 21 22 22 23 24 25 25 26
Receive sensitivity, dBm
-73 -77 -79 -80 -84 -87 -92 -94 -97
Antenna

LigoPTP 4-23 RapidFire Integrated directional dual-pol 23dBi panel

LigoPTP 4-N RapidFire 2 N-type connectors

Wired

First Interface 10/100/1000 Base-T with PoE IN (RJ45)

Second Interface 10/100/1000 Base-T with PoE OUT (RJ45)

Physical

Dimensions without mount:

LigoPTP 4-23 RapidFire Length 379mm (14.9‘’), width 387mm (15.2‘’), height 51mm (2‘’)

LigoPTP 4-N RapidFire Length 399mm (15.7‘’), width 174mm (6.8‘’), height 47mm (1.8‘’)

Mount length till pole 124mm (4.8‘’)

Weight including mount
:
LigoPTP 4-23 RapidFire 3.9kg (8.5lb)

LigoPTP 4-N RapidFire 2.9kg (6.3lb)

Power

Power input method, voltage PoE 802.3at, isolated 42 – 57 VDC

Power consumption (max) 8.6W

Power output method, voltage PoE 802.3af, 48 VDC, 12.95W maximum

PoE inserter and AC/DC adapter are included

Environmental

Operating temperature –40°C (–40F) ~ +65°C (+149F)

Humidity 0 ~ 90 % (non-condensing)

Software features
Wizard for fast link setup
Centralized control from master: A) Common wireless link parameters; B) Individual slave parameters
Smart Auto-channel
Robust data security
QoS with hardware acceleration
Spectrum analyzer
Wireless signal and device state indication on RGB LEDs
Dual firmware image
Management

Dedicated 2.4GHz radio for management

System monitoring SNMP, GUI/HTTP(S), Shell/SSH and WNMS

System configuration GUI/HTTP(S) and WNMS

Regulatory

Certification FCC/IC/CE
Internal antenna
Frequency range
4.9 – 5.9GHz
Gain
23dBi
Polarization
Dual linear
Cross-pol Isolation
27dBi
VSWR
1.5:1
Azimuth beamwidth (H pol)
6°
Azimuth beamwidth (V pol)
7°
Elevation beamwidth
9°

Brand info