LRP-104CET

■ PoE Injector Ports
• Four ports with 802.3at/af PoE injector function with Port-1 to Port-4

■ Functionality
• Four DIP switches to control PoE output on or off with Port-1 to Port-4

■ PoE Standards Compliance
• IEEE 802.3at Power over Ethernet Plus/PSE

■ PoE Type
• End-span

■ PoE Power output
• 52V DC, PoE output depends on LRP Injector or LRP Switch
• 52V DC, 25 watts per port (external DC input)

■ Cabling
• Ethernet: 10BASE-T: 2-pair UTP Cat.3, 4 and 5
• Ethernet: 100BASE-TX: 2-pair UTP Cat.5, 5e and 6

■ Maximum Distance
• 100m

■ Maximum Frame size
• 1522 bytes

■ Power Input
• 44~ 56V DC

■ Power Pin Assignment
• BNC center pole: DC+
• BNC shield: DC-
• RJ45 Pins 1, 3, 5, 7: VCC+
• RJ45 Pins 2, 4, 6, 8: VCC-

■ Cabling
• Coaxial cable: 75 ohm
• RG-6/U cable, less than12Ω/1000 ft.
• RG-59/U cable, less than 30Ω/1000 ft.
• Cat. 3, 4, 5, 5e UTP cable (100 meters, max.)
• EIA/TIA-568 100-ohm STP (100 meters, max.)

■ Maximum Distance
• Coaxial
– Max. 200m with PoE+ output (656ft.)
– Max. 1000m with PoE output (3,280ft.)
• UTP
– Max. 500m with PoE+ output (1,640ft.)

■ Long Reach Ethernet Stan dard
• IEEE 1901

■ Modulation Type
• Wavelet-OFDM

■ Security
• 128-bit AES encryption

■ Frequency Band
• 2 ~ 28 MHz

■ Encryption
• AES 128-bit

■ LRP Compatibility
• With power over coaxial input
– LRP-101CH – 1-Port LRP Injector
– LRP-822CS – 8-Port LRP over Coax Switch
– LRP-1622CS – 16-Port LRP over Coax Switch
• With power over UTP input
– LRP-101UH – 1-Port LRP Injector

*As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environmental factors.

**Depending on what the DC/PoE power input and the length of coaxial cable are.