MLTG-CN LR

Description

• STANDARDS
  • 802.11ay
• ANTENNA
  • Type: Built-in phased array antenna with dish
  • Gain: 40 dBi
  • Scan Range: +/-3°
  • Beam Width: 1°
• RF OUTPUT POWER
  • Up to 56 dBm
    RF output power here stands for EIRP with antenna gain
    Maximum power is limited by local regulatory requirements
• FREQUENCY BAND
  • 57-66GHz
• MODULATION/SPAN>
  • BPSK, QPSK, 16QAM
• INTERFACE
  • 1x 2.5G Ethernet Port (PoE IN)
  • 1x SFP Port
  • 1x 60GHz Radio
• ENVIRONMENTAL CONDITIONS
  • IP66 Rating
  • Operating Temperature: -40ºC (-40ºF) to 60ºC (140ºF)
  • Storage Temperature: -40ºC (-40ºF) to 70ºC (158ºF)
  • Operating Humidity: 5% to 95% non-condensing
  • Wind Resistance: 210 km/h (sustained wind)/ 265 km/h (wind gust)
• POWER
  • 24~57V passive PoE injector (DC terminal block)
• POWER CONSUMPTION
  • 15.9W max.

• DIMENSIONS
  • 35.5 x 35.5 x 31.5 cm (L x W x H)
• WEIGHT
  • 3 kg
• RANGE
  • When connected to MLTG-CN LR:
    Up to 1km (0.62 mi) for MCS9
  • When connected to MLTG-360:
    Up to 700m (0.43 mi) for MCS9
  • When connected to MLTG-CN:
    Up to 500m (0.31 mi) for MCS9
    *Distance will vary depending on environmental factors
• CERTIFICATIONS
  • FCC/IC/CE/VCCI/TELEC
• KEY FEATURES
  • Support channel 1 to channel 4 (57-66GHz)
  • Up to 3.6Gbps bi-directional aggregate throughput
  • High gain antenna with beamforming technology
  • Snow accumulation avoidance design
  • Support TDMA-MAC for dynamic bandwidth allocation
  • Support Over-the-Air (OTA) Security with AES128 encryption
  • Support QoS with 4 service classes
  • Terragraph Client Node mode
    – Support Layer 2 forwarding with VXLAN tunnel
    – Support Layer 2 forwarding with native bridge
    – Support Layer 2 Point-to-Point mode
  • VLAN / Q-in-Q transparent
  • Boot bank swap / reset to default by consecutive power cycle
  • SNMP private MIB for link stats
  • Diagnostic file collection
  • LED for aiming indication and signal strength
  • NMS management