NFT 1N AF

The NFT 1N/ 1N AF are indoor WI-FI access points based on 802.11N technology with integrated
2.4 GHz (2×2) MiMo radios boasting an output power of 28 dBm. 3 Ethernet ports allow connecting
multiple devices to the access point. The NFT 1N model is powered with a 12-24V passive PoE
adapter and the NFT 1N AF model supports the 802.3af standard, which allows powering the
device using a PoE switch.

OS
The indoor access point runs the Infi nity OS – a highly
functional and easy to use operating system. This powerful
and fl exible operating system ensures fl awless operation of
LigoWave hardware devices and effortless setup for those
deploying the networks.
Responsive HTML 5 based GUI
128 concurrent clients
8 virtual networks (SSID+VLAN)
IPv6 support
WNMS compatible

Comparer

Description

Highlights:

WLAN standard IEEE 802.11 b/g/n
Radio mode MIMO 2×2
Operating mode Access point, repeater
Radio frequency band 2.402 – 2.484 GHz (country dependent) FCC 2.412 – 2.462 GHz (CH1-CH11)
Transmit power 2.4 GHz: 28 dBm @ MCS0 (FCC Max certifi ed TX power: 28 dBm)
Channel size 20, 40 MHz
Modulation schemes 802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
802.11 b: DSS (CCK, DQPSK, DBPSK)
Data rates 802.11 n @ 40 MHz: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
802.11 g @ 20 MHz: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11 b @ 20 MHz: 11, 5.5, 2, 1 Mbps
Duplexing scheme Time division duplex
Wireless security WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, Hotspot (UAM)
Roaming Yes
Antenna
Type 2 x internal omni-directional antennas
Gain 3 dBi
Coverage radius 100 meters (328 ft)
Wired
Interface 3 x 10/100 Base-T, RJ45
Networking
Operating mode Bridge, router IPv4 and IPv6
Management IPv4 Static, dynamic
Management IPv6 Static, dynamic stateless, dynamic stateful
Secondary IPv4 Supported
VLAN 802.1Q for management and data
Virtual SSID 8 per each radio
Client isolation Supported
Services
Services SNMP server, NTP client, WNMS client
Power
Power method NFT 1N: 12-24 VDC passive PoE; additional 12-24V DC input
NFT 1N AF: 802.3af with passive PoE (48V) support; additional 48V DC input
Power supply NFT 1N: 100 – 240 VAC to 12-24V VDC passive PoE (inlcuded)
NFT 1N AF:100 – 240 VAC to 48 VDC 802.3af PoE (not included)
Power consumption (max) 6.24 W

Management
System monitoring SNMP v1, wyslog
Physical
Dimensions* 153 mm (6.1‘’), 147 mm (5.8 ‘’), 29 mm (1.14 ‘’)
Weight** 188 g (6.63 oz)
Mounting Suspended ceiling mount, wall/ceiling mount, pole mount
Environmental
Operating temperature -10°C (14 F) ~ +55°C (+131 F)
Humidity 0 ~ 90 % (non-condensing)
Regulatory
Certifi cation FCC/IC/CE

Brand info