TC-600 Golden Modem VDSL Tester with 35G/Annex A/Annex B


VDSL2 tester specially designed for xDSL line test (xDSL include: ADSL, ADSL2, ADSL2+, READSL, VDSL2 etc.) and maintenance. It provides xDSL test, PPPoE dial test, DMM test, Modem emulation, line voltage indication and so on.

TC-600 VDSL2 tester also introduces the Optical Power Meter and Visual Fault Locator function into the unit, as well as the TDR function.

It is one multifunctional tester with smart size, true color LCD and powerful management software as well as the 7200mAh rechargeable battery etc.

There are total three sub models of TC-600 series VDSL2 tester:

TC-600A can support Annex A and up to 17a(100Mbit/s);

TC-600B can support Annex B and up to 17a(100Mbit/s);

TC-600C can support up to 35B(300Mbit/s).

Catégorie :








ITU G.992.1   (G.dmt)

ITU G.992.2   (G.lite)

ITU G.994.1   (G.hs)

ANSI T1.413 issue #2

ITU G.992.5 (ADSL2+) Annex L

Up Channel Rate 0~1.2Mbps
Down Channel Rate 0~24Mbps
Up/Down Attenuation 0~63.5dB
Up/Down Noise Margin 0~32dB
Output Power Available
Error Test CRC, FEC, HEC, NCD, LOS
Display DSL Connect Mode Available
Display Channel Bit Map Available


ITU G.992.1 (G.dmt)

ITU G.992.2   (G.lite)

ITU G.994.1   (G.hs)

ANSI T1.413 Issue # 2

Up channel rate 0~1Mbps
Down channel rate 0~8Mbps
Up/Down attenuation 0~63.5dB
Up/Down noise margin 0~32dB
Output power Available
Error test CRC, FEC, HEC, NCD, LOS
Display DSL connect mode Available
Display channel bit map Available
Be compatible with ADSL2+, ADSL standard.
DSL line attenuation
DSL line noise margin
DSL line up/down channel speed (Inter/Fast mode)
DSL line up/down maximum rate
DMT sub channel bit number: 0~15 and each sub channel frequency points
DSL line error number (CRC, HEC, FEC, LCD, OCD)
DSL line local output power
DSLAM information
Error Code Second
Impulse Noise Protection (INP)
TC-600A Support Annex A and 7 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a   (100Mbit/s)
TC-600B Support Annex B and 7 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a   (100Mbit/s)
TC-600C Support 9 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a,   30a, 35b (300Mbit/s)
DMM Test
DC Voltage (V) 0~400
AC Voltage (V) 0~400
Loop Resistance (Ω) 0~20000
Capacitance (nF) 0~1000
Insulation Resistance (MΩ) 0~50
TDR Test (Optional)
Test Distance (km) 2.5
Fault Type Break/Mix
Dead Zone (m) <1
Resolution Rate (m) 1
Optical Power Meter   (Optional)
Measurement Range (dBm) -70~+10
Detector InGaAs
Accuracy <±3% (-10dBm, 22℃)
Resolution Linearity: 0.1%; Non-linearity: 0.01dBm
Visual Fault Locator   (Optional)
Output Power (mw) 1
Test Distance (km) 5km
Wavelength (nm) 650 ± 20
Output Modes Continuous (CW), 2Hz pulsed
Cable Tracing (Optional)
With supplied accessories, it can do cable tracing and find the trend of the lines
General Parameters
LCD 4 inch, 800×480 TFT
Power Supply Internal Rechargeable 7200mAH Li-ion battery
Battery Duration (h) > 8
Working Temperature (℃) 0~+50
Humidity ≤ 85%
Dimensions (mm) 175×80×52
Weight (g) < 500


— Test objects: ADSL, ADSL2, ADSL2+, READSL, VDSL2

— Annex A(100Mbit/s), Annex B(100Mbit/s), 35B(300Mbit/s) can be optional.

— Fast copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)

–Supports modem emulation and simulating login to Internet

–Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)

–Beep and LEDs alarm indications (Lower Power, PPP, LAN, xDSL)

–Supports all multi-protocol, PPPoE

–Connects to CO via alligator clip or RJ11

–Rechargeable Li-ion battery

— Data memory function

— LCD display, Menu operation

–Auto shut off if no any operation on keyboard

–Compliant with all known DSLAMs

–Software management

–Simple, portable and money-saved


–Optical Power Meter (Optional)

–Visual Fault Locator (Optional)

–TDR Cable Fault Locator (Optional)

–DSL physical layer test

–Modem Emulation (replace the user’s modem completely)

–PPPoE Dialing (RFC1683, RFC2684, RFC2516)

–Telephone Function

–DMM Test

–Ping Function (WAN & LAN)

–Check dangerous voltage

–Data upload to computer and software management

–Setup system parameter: backlight time, shut off automatically, press tone etc.

–Revise PPPoE dial attribute, user name and password; restore factory value and so on.


Brand info