Description
Electrical specifications
DC input voltage range 44.0–57.0V
IEEE 802.3af/at compliant POE output
Output power up to 28W
Power output RJ45 pins 1,2,4,5 (+) and 3,6,7,8 (-)
Data rate 10/100/1000Mbps
Surge protection 2kV line to line,
6kV line to ground (output port)
Physical specifications
DC input
Data input jack RJ45
Data + Power output jack RJ45
Dimensions 117×87×34mm
Weight 270g
Operating temperature –40 to +65C
UTP/FTP cable length 100m total
(from switch to the device)
Radio
Wireless protocol W-Jet V
Radio mode MIMO 2×2
Frequency range 4.900 – 6.100GHz (FCC: 4.940 – 4.990GHz, 5.150-5.250GHz, 5.725-5.850GHz)
Channel size 5, 10, 20, 40, 80MHz
Modulation schemes OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
Data rates @ 80MHz 866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps
Duplexing scheme TDD
Error correction BCC, LDPC
Automatic Channel Selection DFS Compatability
Automatic TPC Supported
Modulation, Mbps 866 780 650 585 520 390 260 195 130 65
TX Power, dBm 25 26 26 27 27 28 29 30 30 31
Receive sensitivity, dBm -71 -73 -77 -79 -80 -84 -87 -92 -94 -97
Antenna
LigoPTP 5-23 RapidFire Integrated directional dual-pol 23dBi panel
LigoPTP 5-N RapidFire 2 N-type connectors
Wired
First Interface 10/100/1000 Base-T with PoE IN (RJ45)
Second Interface 10/100/1000 Base-T with PoE OUT (RJ45)
Physical
Dimensions without mount:
LigoPTP 5-23 RapidFire Length 379mm (14.9‘’), width 387mm (15.2‘’), height 51mm (2‘’)
LigoPTP 5-N RapidFire Length 399mm (15.7‘’), width 174mm (6.8‘’), height 47mm (1.8‘’)
Mount length till pole 124mm (4.8‘’)
Weight including mount:
LigoPTP 5-23 RapidFire 3.9kg (8.5lb)
LigoPTP 5-N RapidFire 2.9kg (6.3lb)
Power
Power input method, voltage PoE 802.3at, isolated 42 – 57VDC
Power consumption (max) 8.6W
Power output method, voltage PoE 802.3af, 48VDC, 12.95W maximum
PoE inserter and AC/DC adapter are included
Environmental
Operating temperature –40°C (–40F) ~ +65°C (+149F)
Humidity 0 ~ 95 % (non-condensing)
Software features
• Wizard for fast link setup
• Centralized control from master: A) Common wireless link parameters; B) Individual slave parameters
• Smart Auto-channel
• Robust data security
• QoS with hardware acceleration
• Spectrum analyzer
• Wireless signal and device state indication on RGB LEDs
• Dual firmware image
Management
Dedicated 2.4GHz radio for management
System monitoring STP/SNMP (V1), GUI/HTTP(S), Shell/SSH and Infinity Controller
System configuration GUI/HTTP(S)
Regulatory
Certification FCC/IC/CE
Internal antenna
Frequency range 4.9 – 5.9GHz
Gain 23dBi
Polarization Dual linear
Cross-pol Isolation 27dBi
VSWR 1.5:1
Azimuth beamwidth (H pol) 6°
Azimuth beamwidth (V pol) 7°
Elevation beamwidth 9°