Description
rapid development of optical fiber networking, the patch cord and pigtail at the ODF in most of the center office become more and more complex and disordered. TUCSON-OPTIC released this new Live Optical Fiber Identification Test Set that is combined by the normal optical fiber Identifier (TC-15) and the tone generator (TG-15). It enables technicians identify the specific fiber without disconnecting it. It will realize good and effective management for the live fiber checking at ODF in the center office
| TG-15 Tone Generator | ||
| Fiber to Measure | 3mm, 2mm, 900um | |
| Wavelength Range | 1300nm~1650nm | |
| Loss | <2dB | |
| Output Power Detect Range | -35dBm~+25dBm | |
| Power Supply | 1.5V AAA (4PCS) | |
| Operation Time | 15 hours | |
| Operating Temperature | -10℃ ~ +60℃ | |
| Storage Temperature | -25℃ ~ +70℃ | |
| Auto Off Time | 5 minutes | |
| Weight | 700g (Including 4PCS AAA Batteries) | |
| Dimension | 200mm*30mm*35mm | |
| TC-15 Optical Fiber Identifier | ||
| Identified Wavelength Range | 800nm~1700nm | |
| Identified Signal Type | CW, 270Hz±5%，1kHz±5%，2kHz±5% | |
| Detector Type | Ø1mm InGaAs 2pcs | |
| Adapter Type | Ø0.25 (Applicable for Bare Fiber) Ø0.9 (Applicable for Ø0.9 Cable) Ø2.0 (Applicable for Ø2.0 Cable) Ø3.0 (Applicable for Ø3.0 Cable) | |
| Signal Direction | Left & Right LED | |
| Singe Direction Test Range (dBm, CW/0.9mm bare fiber) | -46~10(1310nm) | |
| -50~10(1550nm) | ||
| Signal Power Test Range (dBm, CW/0.9mm bare fiber) | -50~+10 | |
| Signal Frequency Display (Hz) | 270, 1K, 2K | |
| Frequency Test Range (dBm, Average Value) | Ø0.9, Ø2.0, Ø3.0 | -30~0 (270Hz, 1KHz) |
| -25~0 (2KHz) | ||
| Ø0.25 | -25~0 (1KHz, 2KHz) | |
| -20~0 (2KHz) | ||
| Insertion Loss (dB, Typical Value) | 0.8 (1310nm) | |
| 2.5 (1550nm) | ||
| Alkaline Battery (V) | 2pcs AA batteries | |
| Operating Temperature (℃) | -10~+60 | |
| Storage Temperature (℃) | -25~+70 | |
| Dimension (mm) | 196*30.5*27 | |
| Weight (g) | 195 | |
