Description
Specifications
| Test Parameters | ||
| Sub Model | TC-180A | TC-180B |
| Dynamic Range (1) | 32/30dB | 28/26dB |
| Fiber Type | Single Mode Fiber | |
| Wavelength | 1310nm/1550nm | |
| Pulse Width (ns) | 5/10/20/40/80/160/320/640/1280/2560/5120/10240/20480/Auto | |
| Distance Range (km) | 0.3/1/3/5/10/30/60/120 | |
| Measurement Time | 15s/30s/1min/2min/3min | |
| Event Dead Zone (2) | 1.2m | |
| Attenuation Dead Zone (2) | 8m | |
| Distance Accuracy | ±(1m+measuring distance×3×10+sampling resolution) | |
| VFL Module | ||
| Wavelength | 650nm | |
| Output Power | ≥-3dBm | |
| Test Distance | 3km | |
| General Parameters | ||
| Display | 3.5 inch TFT Touch LCD | |
| Communication Light Detection | Available | |
| Optical Interface | FC/UPC or SC/UPC | |
| Data Storage | SD card (4GB) > 10000 groups of Trace | |
| Data Interface | SD card interface | |
| Communication Interface | USB interface | |
| Working Temp. | -10℃~+50℃ | |
| Storage Temp. | -20℃~+70℃ | |
| Humidity | ≤95% (non-condensation) | |
| Dimension (mm) | 125×225×60 | |
| Weight (kg) | 1 (battery included) | |
| Notes:
(1) According to the description of the technical specifications, a typical UPC connector shall be used for measurement. Uncertainty caused by refractive index of the optical fiber is not considered. The dynamic range is measured in the condition where the range is 120 km, the pulse width is 20480 ns, and the average time is 3 min. (2) Dead zone measurement conditions: The reflective event is within 10 km, the reflection strength is smaller than -45 dB, and the minimum pulse width is used for measurement. |
||
TEST INTERFACE
