Description
SPECIFICATIONS
| ADSL2+ | ||
|
Standards
| ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) ITU G.994.1 (G.hs) ANSI T1.413 issue #2 ITU G.992.5 (ADSL2+) Annex L | |
| Up Channel Rate | 0~1.2Mbps | |
| Down Channel Rate | 0~24Mbps | |
| Up/Down Attenuation | 0~63.5dB | |
| Up/Down Noise Margin | 0~32dB | |
| Output Power | Available | |
| Error Test | CRC, FEC, HEC, NCD, LOS | |
| Display DSL Connect Mode | Available | |
| Display Channel Bit Map | Available | |
| ADSL | ||
| Standards | ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) ITU G.994.1 (G.hs) ANSI T1.413 Issue # 2 | |
| Up channel rate | 0~1Mbps | |
| Down channel rate | 0~8Mbps | |
| Up/Down attenuation | 0~63.5dB | |
| Up/Down noise margin | 0~32dB | |
| Output power | Available | |
| Error test | CRC, FEC, HEC, NCD, LOS | |
| Display DSL connect mode | Available | |
| Display channel bit map | Available | |
| VDSL2 | ||
| Be compatible with ADSL2+, ADSL standard. | ||
| DSL line attenuation | ||
| DSL line noise margin | ||
| DSL line up/down channel speed (Inter/Fast mode) | ||
| DSL line up/down maximum rate | ||
| DMT sub channel bit number: 0~15 and each sub channel frequency points | ||
| DSL line error number (CRC, HEC, FEC, LCD, OCD) | ||
| DSL line local output power | ||
| DSLAM information | ||
| Error Code Second | ||
| Impulse Noise Protection (INP) | ||
| TC-600A | Support Annex A and 7 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a (100Mbit/s) | |
| TC-600B | Support Annex B and 7 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a (100Mbit/s) | |
| TC-600C | Support 9 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a, 35b (300Mbit/s) | |
| DMM Test | ||
| DC Voltage (V) | 0~400 | |
| AC Voltage (V) | 0~400 | |
| Loop Resistance (Ω) | 0~20000 | |
| Capacitance (nF) | 0~1000 | |
| Insulation Resistance (MΩ) | 0~50 | |
| TDR Test (Optional) | ||
| Test Distance (km) | 2.5 | |
| Fault Type | Break/Mix | |
| Dead Zone (m) | <1 | |
| Resolution Rate (m) | 1 | |
| Optical Power Meter (Optional) | ||
| Measurement Range (dBm) | -70~+10 | |
| Detector | InGaAs | |
| Accuracy | <±3% (-10dBm, 22℃) | |
| Resolution | Linearity: 0.1%; Non-linearity: 0.01dBm | |
| Visual Fault Locator (Optional) | ||
| Output Power (mw) | 1 | |
| Test Distance (km) | 5km | |
| Wavelength (nm) | 650 ± 20 | |
| Output Modes | Continuous (CW), 2Hz pulsed | |
| Cable Tracing (Optional) | ||
| With supplied accessories, it can do cable tracing and find the trend of the lines | ||
| General Parameters | ||
| LCD | 4 inch, 800×480 TFT | |
| Power Supply | Internal Rechargeable 7200mAH Li-ion battery | |
| Battery Duration (h) | > 8 | |
| Working Temperature (℃) | 0~+50 | |
| Humidity | ≤ 85% | |
| Dimensions (mm) | 175×80×52 | |
| Weight (g) | < 500 | |
MAIN FEATURES
— Test objects: ADSL, ADSL2, ADSL2+, READSL, VDSL2
— Annex A(100Mbit/s), Annex B(100Mbit/s), 35B(300Mbit/s) can be optional.
— Fast copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)
–Supports modem emulation and simulating login to Internet
–Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)
–Beep and LEDs alarm indications (Lower Power, PPP, LAN, xDSL)
–Supports all multi-protocol, PPPoE
–Connects to CO via alligator clip or RJ11
–Rechargeable Li-ion battery
— Data memory function
— LCD display, Menu operation
–Auto shut off if no any operation on keyboard
–Compliant with all known DSLAMs
–Software management
–Simple, portable and money-saved
III. FUNCTIONS
–Optical Power Meter (Optional)
–Visual Fault Locator (Optional)
–TDR Cable Fault Locator (Optional)
–DSL physical layer test
–Modem Emulation (replace the user’s modem completely)
–PPPoE Dialing (RFC1683, RFC2684, RFC2516)
–Telephone Function
–DMM Test
–Ping Function (WAN & LAN)
–Check dangerous voltage
–Data upload to computer and software management
–Setup system parameter: backlight time, shut off automatically, press tone etc.
–Revise PPPoE dial attribute, user name and password; restore factory value and so on.
