Home » POE » Page 2
Showing 13–24 of 108 results
Grid view List view
FGSW-2022VHP FGSW-2022VHP Physical Port
16-port 10/100BASE-TX Fast Ethernet RJ45 copper
2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP interfaces
Vue Rapide
FGSW-2511P Physical Interface
24 10/100BASE-TX RJ45 copper ports One 10/100/1000BASE-T Gigabit RJ45 copper port One shared 1000BASE-X SFP interface Hardware-based DIP switch for “Standard”, “VLAN”, “QoS” or “Extend” mode selection Vue Rapide
FGSW-2622VHP FGSW-2622VHP Physical Port
24 10/100BASE-TX Fast Ethernet RJ45 copper ports
2 10/100/1000BASE-T TP interfaces and 2 1000BASE-X mini-GBIC SFP interfaces
Vue Rapide
FGSW-2624HPS FGSW-2624HPS Physical Port
24-port 10/100BASE-TX RJ45 copper with IEEE 802.3at/af PoE+ injector2-port 10/100/1000BASE-T Gigabit RJ45 copper2 1000BASE-X mini-GBIC/SFP slots , shared with port-25 to port-26RJ45 console interface for switch basic management and setup Reset button for system factory default Switching
Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation Automatic address learning and address aging Supports CSMA/CD protocol
Vue Rapide
FSD-1008HP Physical Port
10-port 10/100BASE-TX Fast Ethernet RJ45 copper 8-port IEEE 802.3at PoE+ Injector (Port-1 to Port-8) Vue Rapide
FSD-604HP RJ45 Interface
6 10/100Mbps Fast Ethernet ports 4 ports supporting 52V DC power to PoE powered device Vue Rapide
FST-80x Series Standards
Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and 100BASE-FX Ethernet standards Interface
One 10/100BASE-TX port with RJ45 connector One 100BASE-FX port with ST/SC/WDM connector supporting multi-mode or single-mode fiber optic cable Auto-negotiation and auto-MDI / MDI-X for 10/100BASE-TX port Layer 2 Features
Back-pressure and IEEE 802.3x compliant flow control and full wire-speed forwarding rate Link Loss Return (LLR ) switch on each fiber optic is to aid in troubleshooting remote network connections Link Loss Carry Forward (LLCF ) works with LLR in diagnosing network connections Smart Management
Provides DIP switch for setting fiber ( HDX/FDX), UTP ( auto-negotiation / manual), speed (10/100Mbps), duplex mode (half/full), LLR ( disable/enable), LLCF ( disable/enable) Manageable through web smart/managed media converter chassis system (MC-1600MR/MC-1610MR series) Hardware
Used as a stand-alone device or works with web smart/managed media converter chassis for up to 16 converters with redundant power supply for optional expanding use LED indicators for converter status Choice of fiber-connector from ST/SC/WDM, multi-mode/single-mode fiber EMI standards complies with FCC, CE class B
Vue Rapide
FTP-802 / FTP-802S15 Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3afPower over Ethernet standards Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function on copper port IEEE 802.3x full duplex flow control and back pressure in half duplex eliminate packets loss Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port Auto-detect PoE IEEE 802.3af equipment; protects devices from being damaged by incorrect installation 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm) on FTP-802 100Base-FX interface for up to 15km (single-mode fiber 9µm/125µm) on FTP-802S15 DIP-switch: LFP (Link Fault Pass-through) mode selection Compact in size, easy to install LED indicators for easy network diagnostics
Vue Rapide
FTP-802 / FTP-802S15 Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3afPower over Ethernet standards Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function on copper port IEEE 802.3x full duplex flow control and back pressure in half duplex eliminate packets loss Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port Auto-detect PoE IEEE 802.3af equipment; protects devices from being damaged by incorrect installation 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm) on FTP-802 100Base-FX interface for up to 15km (single-mode fiber 9µm/125µm) on FTP-802S15 DIP-switch: LFP (Link Fault Pass-through) mode selection Compact in size, easy to install LED indicators for easy network diagnostics
Vue Rapide
FTP-802 / FTP-802S15 Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3afPower over Ethernet standards Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function on copper port IEEE 802.3x full duplex flow control and back pressure in half duplex eliminate packets loss Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port Auto-detect PoE IEEE 802.3af equipment; protects devices from being damaged by incorrect installation 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm) on FTP-802 100Base-FX interface for up to 15km (single-mode fiber 9µm/125µm) on FTP-802S15 DIP-switch: LFP (Link Fault Pass-through) mode selection Compact in size, easy to install LED indicators for easy network diagnostics
Vue Rapide
FusionSwitch™ PoE 10-Port The IgniteNet FusionSwitch™ FNS-PoE-10 is a cost-effective L2 managed switch with eight Gigabit PoE ports and two 1G uplink ports.
The FNS-PoE-10 is a full-PoE fanless design, it supports PoE on up to 8 ports at 15.4 W, or 4 ports at 30 W to meet the increasing power demands of users for IP cameras, IP telephones, or access points. With powerful software and hardware features, the FNS-PoE-10 is designed for SMB and enterprise markets and provides plenty of management options, including a console port.
Vue Rapide