● STATION DE BASES

Showing 1–12 of 16 results

  • LigoBASE 5-90

    LigoPTMP series point to multipoint system delivers
    600+ Mbps throughput via its unique and powerful RF

    design that supports up to 256QAM modulation and

    31 dBm output power. 1.2 GHz dedicated CPU ensures

    swift data processing and high packet per second rate

    (PPS) which is important for real time data transmission

    applications. Equipped with two Gigabit Ethernet ports,

    one with PoE passthrough, the unit allows powering and

    connecting two devices on the tower (another LigoBASE

    or IP camera). LigoBASE incorporates integrated surge and

    ESD protection according to IEC standards passing Class

    4 requirements. Additionally, weatherproof IP-67 standard

    rated enclosure design allows using the equipment in any

    climate conditions.

    LigoWave OS

    The full featured operating system makes LigoPTMP

    devices ideal not only for WISPs and operators, but also for

    security, enterprise or industrial applications. Proprietary

    data transmission protocol (W-Jet V) ensures smooth

    performance even in noisy areas at the same time delivering

    high capacity, low latency and high packet per second

    rate. QoS (quality of service) mechanism allows prioritizing

    mission critical data and efficiently transmitting voice, video

    or other real time data over the wireless network. Essential

    tools like spectrum analyzer, site survey, antenna alignment

    and others are included.

    Vue Rapide
  • LigoDLB 2-90

    HighLights:

    LigoWave’s DLB 2-90 delivers the highest performance and stability available in the 2.4 GHz Base Station class. This
    product combines a robust, highly advanced 802.11n radio core containing MIMO 2×2 technology with an integrated,

    high gain, dual polarized, 100° sector antenna. The device is powered by a reliable, advanced, and feature-rich operating

    system, allowing the creation of high throughput, stable wireless networks quickly and effectively. Although the DLB

    2-90 was designed mainly as a Base Station it also supports client-operating mode, which greatly extends the possible

    application scenarios.

    The smart dynamic polling based protocol (ipoll 3) ensures reliable communication even in congested areas with 64

    client devices connected to a base-station.

    Equipped with LigoWave’s dual firmware image feature, remote software upgrades are assured even if a power failure

    interrupts the process. The device will restart using the prior firmware in the event of an upgrade failure.

    The enclosure is made of polycarbonate plastic with UV inhibitors to provide years of outdoor exposure in direct sunlight

    without cracking. The DLB 2-90 was designed and tested to meet an IP-65 rating as well as vibration, temperature, drop,

    salt, fog, and electrical surge standards to ensure a high level of reliability unsurpassed in the industry. It is equipped

    with a grounding lug and a grounded 24-volt PoE to allow a professional installation, resistant to electrical surges. The

    mounting bracket permits installation on a wall or a pole and provides up to 30 degrees of down-tilt adjustment.

    Vue Rapide
  • LigoDLB 2-90-16 PRO

    Integrated 2.4 GHz (2×2) MiMo radio
    Integrated dual – polarized 90 degree sector antennna (16 dBi)
    Frequency 2.402 – 2.492 GHz (FCC 2.412 – 2.462 GHz)
    Up to 30 dBm output power (country dependent)
    Improved noise immunity
    Dedicated 720 MHz CPU with 128 MB of Flash and RAM
    iPoll 3  – proprietary protocol for data transmission
    Powerful OS
    Gigabit Ethernet port
    37 – 56 VDC PoE 802.3af (AC to DC adapter included)
    IP-67 standards rated enclosure
    Free NMS (Infinity Controller)
    Professional mounting bracket

    Product Available upon Special Request
    For more Information contact our sales

    Powerful hardware platform

    Based on a QCA 9557 chipset (720 MHz) and 128 MBytes of RAM/Flash memory the LigoDLB PRO series access points are an ideal solution for resource demanding installations with a high number of clients connected to a single AP. The 48V Gigabit Ethernet port (802.3af) allows utilizing the full capacity of the base-stations.

     

    Vue Rapide
  • LigoDLB 2-90-19 PRO

    HighLights:

    Integrated 2.4 GHz (2×2) MiMo radio
    Integrated dual – polarized 90 degree sector antennna (19 dBi)
    Frequency 2.402 – 2.492 GHz (FCC 2.412 – 2.462 GHz)
    Up to 30 dBm output power (country dependent)
    Improved noise immunity
    Dedicated 720 MHz CPU with 128 MB of Flash and RAM
    iPoll 3  – proprietary protocol for data transmission
    Powerful OS
    Gigabit Ethernet port
    37 – 56 VDC PoE 802.3af (AC to DC adapter included)
    IP-67 standards rated enclosure
    Free NMS (Infinity Controller)
    Professional mounting bracket

    Product Available upon Special Request
    For more Information contact our sales

    Vue Rapide
  • LigoDLB 2-90n

    HighLights:

    LigoWave’s DLB 2-90n delivers the highest performance and stability available in the 2.4GHz Base Station class. This product
    combines a robust, highly advanced 802.11n radio core containing MIMO 2×2 technology with an integrated, high gain, dual

    polarized, 100° sector antenna. The device is powered by a reliable, advanced, and feature-rich operating system, allowing the

    creation of high throughput, stable wireless networks quickly and effectively. Although the DLB 2-90n was designed mainly as a

    Base Station it also supports client-operating mode, which greatly extends the possible application scenarios.

    The smart dynamic polling based protocol (iPoll 3) ensures reliable communication even in congested areas with 64 client

    devices connected to a base-station.

    Equipped with LigoWave’s dual firmware image feature, remote software upgrades are assured even if a power failure interrupts

    the process. The device will restart using the prior firmware in the event of an upgrade failure.

    The enclosure is made of polycarbonate plastic with UV inhibitors to provide years of outdoor exposure in direct sunlight

    without cracking. The DLB 2-90n was designed and tested to meet an IP-65 rating as well as vibration, temperature, drop,

    salt, fog, and electrical surge standards to ensure a high level of reliability unsurpassed in the industry. It is equipped with a

    grounding lug and a grounded 24-volt PoE to allow a professional installation, resistant to electrical surges. The mounting

    bracket permits installation on a wall or a pole and provides up to 30 degrees of down-tilt adjustment.

    Vue Rapide
  • LigoDLB 5-90

    Highlights:

    5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
    80,000 PPS
    170 Mbps capacity
    High output power 29 dBm radio
    Integrated 18 dBi dual-polarized 90 degree sector antenna
    Powerful OS
    Smart polling data transmission protocol (iPoll 3)
    Meets IP – 65 certification
    Free NMS (Infinity Controller)
    Responsive HTML 5 based GUI
    Wall and pole mounting option

     

    Vue Rapide
  • LigoDLB 5-90-17 PRO

    Highlights:

    2.402 – 2.492 GHz support
    80,000 PPS
    170 Mbps capacity
    High output power 31 dBm radio
    Integrated directional 14 dBi dual – polarized panel antenna
    Powerful OS
    Smart polling data transmission protocol (iPoll 3)
    Weather proof (IP-66 rated) design
    Free NMS (Infinity Controller)
    Responsive HTML 5 based GUI
    Wall and pole mounting option

     

    Vue Rapide
  • LigoDLB 5-90-17ac PRO

    500+ Mbps thruoghput – a result of powerful hardware platform with 802.11ac technology based radio and a proprietary data
    transmission protocol (iPoll). Based on a QCA 9557 CPU (720 MHz), QCA 9882 radio and 128 MBytes of RAM/Flash memory the

    LigoDLB PRO ac-TH series access points are an ideal solution for resource demanding installations. State of the art RF design with

    great output power and sensitivity parameters improve range and capacity over highest modulation – 256 QAM. The 48V Gigabit

    Ethernet port (802.3af ) allows utilizing the full capacity of the base-station. LigoDLB ac series devices are backwards compatible with

    LigoDLB devices using iPoll mode, which helps to expand or upgrade existing networks using the latest technologies gradually.

     

    Vue Rapide
  • LigoDLB 5-90-20 PRO

    Highlights:

    Integrated 5 GHz (2×2) MiMo radio
    Integrated dual – polarized 90 degree sector antennna (20 dBi)
    Frequency 5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
    Up to 30 dBm output power (country dependent)
    Improved noise immunity
    Dedicated 720 MHz CPU with 128 MB of Flash and RAM
    iPoll 3 – proprietary protocol for data transmission
    Powerful OS
    Gigabit Ethernet port
    37 – 56 VDC PoE 802.3af (AC to DC adapter included)
    IP-67 standards rated enclosure
    Free NMS (Infinity Controller)
    Professional mounting bracket

    Vue Rapide
  • LigoDLB 5-90-20ac PRO

    500+ Mbps throughput – the result of a powerful hardware platform with an 802.11ac technology based radio and a proprietary data transmission protocol (iPoll). Incorporating a QCA 9557 CPU (720 MHz), a QCA 9882 radio and 128 MBytes of RAM/Flash memory the LigoDLB PRO ac series access points are an ideal solution for resource demanding installations. State of the art RF design with great output power and sensitivity parameters improve range and capacity
    over the highest modulation – 256 QAM. The 48V Gigabit Ethernet port (802.3af) allows utilizing the full capacity of the
    base-station. LigoDLB ac series devices are backwards compatible with LigoDLB devices using iPoll mode, which helps to expand or upgrade existing networks with the latest technologies over time.

     

    Vue Rapide
  • LigoDLB 5-90ac

    500+ Mbps throughput – a result of powerful hardware platform with 802.11ac technology based radio and a proprietary
    data transmission protocol (iPoll 3). Incorporating a QCA 9563 CPU (750MHz), a QCA 9882 radio and 64MBytes of RAM

    and 16 MBytes of flash memory the, LigoDLB ac series devices are an ideal solution for capacity demanding applications.

    State of the art RF design with great output power and sensitivity parameters improve range and capacity over the

    highest modulation—256-QAM. The 24V Gigabit Ethernet port (passive PoE) allows utilizing the full capacity of the radio

    when used in a point-to-multipoint network design. LigoDLB ac series devices are backwards compatible with LigoDLB

    devices using iPoll mode, which helps to expand or upgrade existing networks using the latest technologies over time.

    Powerfull OS
    The LigoDLB OS is a highly functional and easy to use

    operating system embedded in all LigoDLB hardware

    devices for effortless setup and trouble free operation.

    High performance (500Mbps) allows offering more

    bandwidth together with additional services such as VoIP

    and IPTV. This is possible when using LigoWave’s smart

    QoS mechanism and multicast traffic enhancements for

    triple play services. Such services are essential for all next

    generation service providers to complement their existing

    portfolios. iPoll 3, LigoWave’s proprietary transmission

    protocol, ensures smooth performance with a high number

    of clients even in noisy environments.

    Vue Rapide
  • LigoDLB 5-90n

    Highlights:

    5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
    80,000 PPS
    170 Mbps capacity
    High output power 29 dBm radio
    Integrated 18 dBi dual-polarized 90 degree sector antenna
    Powerful OS
    Smart polling data transmission protocol (iPoll 3)
    Meets IP – 66 certification
    Integrated surge protection
    Responsive HTML 5 based GUI
    Pole mounting

     

    Vue Rapide
X