CE5810-48T4S-EI

CE5810-48T4S-EI Switch 48-Port GE RJ45, 4-Port 10GE SFP+, Without Fan and Power Module. It is one of the Huawei CloudEngine CE5800 series (CE5800 for short) switches. The Huawei CloudEngine CE5800 series switches are next-generation, high-density Gigabit Ethernet switches designed for data centers and high-end campus networks. The hardware has an advanced architectural design with the industry’s highest density of GE access ports. The CE5800 is also the first Gigabit Ethernet access switch to provide 40 GE uplink ports.

Product CodeCE5810-48T4S-EI
Software VersionV100R002C00 and later
Fixed GE interfaces48*10/100/1000BASE-T
Fixed 10GE interfaces4*10GE SFP+
Fixed 40GE interfacesNone
Fixed 100GE interfacesNone
Base-T Ports 48
SFP+ Ports4
QSFP+ Ports0
Switching Capacity176 Gbit/s
Forwarding Rate132 Mpps
Power module typePluggable AC or DC power module, 1+1 backup supported
Rated voltage range100 V AC to 240 V AC, 50/60 Hz

-48 V DC to -60 V DC

Maximum power consumption92W
AirflowFront-to-back or back-to-front, depending on the fan modules and power modules used in the chassis
Dimensions (W x D x H)442 mm x 420 mm x 43.6 mm
Weight (fully loaded)8.2 kg (18.1 lb)
Comparer
Categories: ,

Description

Base-T Ports 48
SFP+ Ports 4
QSFP+ Ports –
Switching Capacity176 Gbit/s
Forwarding Rates132 Mpps
Airflow DesignFront-to-back or back-to-front
Device VirtualizationiStack
Super Virtual Fabric (SVF)
Network VirtualizationM-LAG
TRILL (CE5855 & CE5850)
VM AwarenessAgile Controller
SDNOpen Programmability System (OPS)
Traffic AnalysisNetStream
sFlow
VLANAdding access, trunk, and hybrid interfaces to VLANs
Default VLAN
QinQ
MUX VLAN
GVRP
ACLingress: 4.5k
egress: 1k
MAC Address Tablemaximum: 32k
Dynamic learning and aging of MAC addresses
Static, dynamic, and black hole MAC address entries
Packet filtering based on source MAC addresses
MAC address limiting based on ports and VLANs
ARP (maximum)8k
IPv4 FIB (maximum)12k
IP RoutingIPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (not supported by CE5855)
IPv6 FIB (maximum)6k
IPv6IPv6 Neighbor Discovery (ND) (not supported by CE5855)
Path MTU Discovery (PMTU) (not supported by CE5855)
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6
Multicast FIB (maximum)8k
MulticastIGMP, PIM-SM, PIM-DM, MSDP, and MBGP
IGMP snooping
IGMP proxy
Fast leave of multicast member interfaces
Multicast traffic suppression
Multicast VLAN
ReliabilityLACP
STP, RSTP, VBST, MSTP
BPDU protection, root protection, and loop protection
Smart Link and multi-instance
DLDP
ERPS (G.8032)
VRRP, VRRP load balancing, and BFD for VRRP
BFD for BGP/IS-IS/OSPF/Static route
QoSTraffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
Actions of ACL, CAR, re-marking, and scheduling
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR
Congestion avoidance mechanisms, including WRED and tail drop
Traffic shaping
Configuration and MaintenanceConsole, Telnet, and SSH terminals
Network management protocols, such as SNMPv1/v2c/v3
File upload and download through FTP and TFTP
BootROM upgrade and remote upgrade
802.3az Energy Efficient Ethernet (EEE)
Hot patches
User operation logs
Zero-Touch Provisioning (ZTP)
Security and Management802.1x authentication
Command line authority control based on user levels, preventing unauthorized users from using commands
DoS, ARP, and ICMP attack defenses
Port isolation, port security, and sticky MAC
Binding of the IP address, MAC address, interface number, and VLAN ID
Authentication methods, including AAA, RADIUS, and HWTACACS
Remote Network Monitoring (RMON)
Dimensions (W x D x H)442 mm x 420 mm x 43.6 mm
Weight (fully loaded)8.2 kg (18.1 lb)
Environmental ParametersOperating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
Relative humidity: 5% to 95%, non-condensing
Operating Voltage AC: 90V to 290V
DC: -38.4V to -72V
Maximum Power Consumption92W

Brand info