Description
PlusIII-3KLB
3000VA/2700W/96VDC
Phase : 1P2W+G, 220/230/240VAC Voltage Range : 110VAC-300VAC Frequency: 50Hz or 60Hz (Auto Sensing) THDi : <5% at full load Voltage : 220/230/240VAC Voltage Regulation : +/- 2% Waveform : Pure Sinewave Crest Ratio : 3:1
| MODEL | PlusIII-3KLB | ||
| CAPACITY | 3KVA/2 7KW | ||
| INPUT | |||
| Voltage | 1 Phase 2 Wires with Ground 220/230/240Vac | ||
| Voltage Range | 110-300Vac | ||
| Frequency | 50Hz or 60Hz (Auto Sensing) | ||
| THDI | <5% at full Load | ||
| OUTPUT | |||
| Voltage | 220/230/240Vac | ||
| Voltage Range | +/- 2% | ||
| Frequency (Battery Mode) | 50Hz or 60Hz +/- 0.2Hz | ||
| Waveform | Pure Sinewave | ||
| THD | 3%(linear load). 5%(non-linear load) | ||
| Crest Ratio | 3:1 | ||
| EFFICIENCY | |||
| To AC Mode | >88% | ||
| To Battery Mode | >85% | ||
| To ECO Mode | >93% | ||
| BATTERY | |||
| Voltage | 96VDC | ||
| Type | 12V/7AH*8pcs | ||
| Recharge Time | 5Hrs to 90% | ||
| TRANSFER TIME | |||
| Line Mode to Battery Mode | Oms | ||
| Inverter to Bypass ECO Mode | < 4ms | ||
| ECO Mode to Inverter | 10ms | ||
| DISPLAY | |||
| LCD Display | Input Output Load Battery Mode/F Output voltage and frequency and Bypass ; ault/Warning code. Inverter operating Bypass disable/enable selection information operating | ||
| AUDIBLE ALARM | |||
| Battery Mode | Beeps Every 4 Seconds | ||
| Battery Low | Sounding Every Second | ||
| Overload | Sounding Twice Every Second | ||
| UPS Fault | Continuously Beeping | ||
| COMMUNICATIONS | |||
| Interface (Port) | USB Port | ||
| Intelligent Slot | Slot for SNMP or AS400 card (Optional) | ||
| EPO | Emergency Power Off | ||
| ENVIRONMENT | |||
| Operating Temperature | 0 45°C | ||
| Humidity | 20-90% non-condensing | ||
| Acoustic Noise | 50dB at 1M | ||
| PHYSICAL | |||
| Dimension(D*W »H) | 560*193*346mm |
