IGS-5225-8T2S2X

Physical Port

• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 2 100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection
• 2 10GBASE-SR/LR SFP+ slots, backward compatible with 1000BASE-SX/LX/BX and 2500BAS-X SFP
• One RJ45 console interface for basic management and setup

Industrial Case and Installation

• IP30 aluminum case
• DIN rail and wall-mount design
• Redundant power design

– 12~48V DC, redundant power with polarity reverse protect function

– 24V AC power input acceptable
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

Digital Input and Digital Output

• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
• Storm Control support

– Broadcast/Multicast/Unicast

• Supports VLAN

– IEEE 802.1Q tagged VLAN

– Up to 4K VLANs groups, out of 4095 VLAN IDs

– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

– Private VLAN Edge (PVE)

– Protocol-based VLAN

– MAC-based VLAN

– Voice VLAN
• Supports Spanning Tree Protocol

– IEEE 802.1D Spanning Tree Protocol (STP)

– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN

– BPDU Guard

• Supports Link Aggregation

– 802.3ad Link Aggregation Control Protocol (LACP)

– Cisco ether-channel (static trunk)

– Maximum 6 trunk groups with 8 ports per trunk group

– Up to 16Gbps bandwidth (duplex mode)

• Provides port mirror (1-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops

Layer 3 IP Routing Features

• IP interfaces (Max. 128 VLAN interfaces)
• Routing table (Max. 128 routing entries)
• Routing Protocols (IPv4/IPv6 hardware static routing)

Quality of Service

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification

– IEEE 802.1p CoS

– TOS/DSCP/IP precedence of IPv4/IPv6 packets

– IP TCP/UDP port number

– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing policies on the switch port
• DSCP remarking

Multicast

• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• Multicast VLAN Registration (MVR) support

Security

• IEEE 802.1x Port-based/MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
• TACACS+ login users access authentication
• RADIUS/TACACS+ users access authentication
• Access Control List

– IP-based Access Control List (ACL)

– MAC-based Access Control List

• Source MAC/IP address binding
• DHCP snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• Auto DoS rule to defend DoS attacks
• IP address access management to prevent unauthorized intruder

Management

• IPv4 and IPv6 dual stack management
• Switch Management Interfaces

– Console/Telnet Command Line Interface

– Web switch management

– SNMP v1, v2c and v3 switch management

– SSH/SSL secure access
• Four RMON groups (history, statistics, alarms, and events)
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance

– Firmware upload/download via HTTP/TFTP

– Reset button for system reboot or reset to factory default

– Dual Images
• DHCP Server
• DHCP Relay
• DHCP Option 82
• User Privilege levels control
• Network Time Protocol (NTP)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic

– ICMPv6/ICMPv4 Remote Ping

– Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues

• SMTP/Syslog remote alarm
• System Log
• SNMP trap for interface Link up and Link down notification
• SFP-DDM (Digital Diagnostic Monitor)
• Reset button for system reboot or reset to factory default
• ONVIF Supports
• Precision Time Protocol (PTP) Clock transparent
• PLANET Smart Discovery Utility for deployment management