IPOE-E302

ISW-808PT-M12Installer APP

Physical Port

Three 10/100/1000BASE-T Gigabit RJ45 ports
- 1-port data + power input
- 2-port data + power output

Power over Ethernet

1-port data + power input
- Complies with IEEE 802.3bt PoE++ Type 4 standard PD
- Compatible with PoH (Power over HDBASE-T) protocol
- Backward compatible with IEEE 802.3at PoE+ end-span or mid-span PD
- Supports PoE input power up to 95 watts
2-port data + power output
- Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type 3 PSE standard
- Up to 2 IEEE 802.3at/802.3bt PoE devices powered
- Supports total PoE budget up to 65 watts for 2 PoE output ports
- Auto detects powered device (PD)
Extends the range of PoE to an additional 100 meters (328ft.)
Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
Integrates address look-up engine, supporting 2K absolute MAC addresses
9K jumbo frame support in 1000Mbps duplex mode
Automatic address learning and address aging

Industrial Case and Installation

IP67-rated aluminum case
Wall-mount design
Supports 6KV DC Ethernet ESD protection
-40 to 75 degrees C operating temperature
No external power cable required for installation
Plug and Play installation

Ajoutez au devis

Description
Brand info

Description

Hardware Specifications
Network Connector	PoE in Port – 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in – Auto MDI/MDI-X, auto-negotiation RJ45 connector PoE out Port – 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/bt PoE++ “Data + DC” out – Auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture	Store-and-Forward switch architecture
MAC Address Table	2K MAC address table with auto learning function
Data Buffer	1Mbit
Switch Fabric	6Gbps
Switch Throughput	4.46Mpps @ 64Bytes
Flow Control	IEEE 802.3x pause frame for full duplex Back pressure for half duplex
Jumbo Frame	9Kbytes
ESD Protection	Air 8KV DC Contact 6KV DC
Surge Protection	6KV
Enclosure	IP67-rated and IK10 aluminum case
Installation	Wall-mount ear
LED Display	Link/ACT LED x 3
Dimensions (W x D x H)	150 x 43.8 x 72.94 mm 169.85 x 43.8 x 72.94 mm, with cable gland
Weight	339g 372g (with three waterproof cable glands)
Power Consumption	97 watts/331.6BTU (Full loading with PoE function)
Power over Ethernet
PoE Standard	PoE in Port – IEEE 802.3bt PoE++ Type 4 standard PD – PoH (Power over HDBASE-T) – IEEE 802.3at PoE+ end-span/mid-span PD Per PoE out Port IEEE 802.3bt PoE++ Type 3 PSE Backward compatible with IEEE 802.3at PoE+ PSE
PoE Power	PoE in Port 50~57V DC, max. 95 watts Per PoE out Port 48~55V DC, max. 60 watts
Power Pin Assignment	PoE in Port 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) or 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-) Per PoE out Port 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) or 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-)
PoE Power Budget	65 watts (max.) @ IEEE 802.3bt PoE++ 30 watts (max.) @ IEEE 802.3at PoE+ input IEEE 802.3af PoE input not supported
Standards Conformance
Regulatory Compliance	FCC Part 15 Class A CE
Stability Testing	IEC 60068-2-32 (Free fall) IEC 60068-2-27 (Shock) IEC 60068-2-6 (Vibration)
Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus
Environment
Operating	Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Storage	Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing)

Brand info

PLANET

View All Products