Description
| Hardware Specifications | |
|---|---|
| Fast Ethernet Copper Ports | Five 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-5) |
| PoE Injector Port | Four ports with 802.3af/at PoE+ injector function (Port-1 to Port-4) |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 1Gbps/non-blocking |
| Switch Throughput@64 bytes | 0.74Mpps @64 bytes |
| MAC Address Table | 1K entries |
| Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| Jumbo Frame | 1536 Bytes |
| DIP Switch (Port-1 to Port-4) | Standard mode: 30-watt PoE transmission distance of 100m at speed of 10/100Mbps VLAN mode: « Port-based VLAN Protection » where ports can be isolated from each other via one DIP switch. Only Port-5 can visit other ports. Extend mode: 25-watt PoE transmission distance of 250m at speed of 10Mbps |
| LED Indicators | 3 x LED for System and Power:
2 x LED for PoE Copper Port (Port-1~Port-4):
1 x LED for 10/100TX Copper Port (Port-5):
4 x LED for PoE Usage
|
| Connector | Removable 6-pin terminal block
|
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC |
| Power Requirements | 12~48V DC, 7A (max.) |
| Power Consumption/ Dissipation | 3.7 watts, 12.6 BTU (Standby without PoE function) at DC 12V power input 70 watts, 238.8 BTU (Full loading with PoE function) at DC 12V power input 4.6 watts, 15.7 BTU (Standby without PoE function) at DC 24V power input 105.1 watts, 358.6 BTU (Full loading with PoE function) at DC 24V power input 4.8 watts, 16.4 BTU (Standby without PoE function) at DC 48V power input 136.8 watts, 466.8 BTU (Full loading with PoE function) at DC 48V power input |
| Dimensions (W x D x H) | 50 x 85.1 x 135 mm |
| Weight | 596g |
| ESD Protection | 5KV DC |
| Enclosure | IP40 metal case |
| Installation | DIN-rail kit and wall-mount kit |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| Power Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Output | Per port 54V DC , max. 36 watts |
| PoE Power Budget (max.) | 60W @12V DC input 90W @24V DC input 120W @48V DC input |
| Max. Number of Class 2 PDs | 4 |
| Max. Number of Class 3 PDs | 4 |
| Max. Number of Class 4 PDs | 4 |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
| Environment | |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Ordering Information | |
|---|---|
ISW-504PT |
Industrial 5-Port 10/100TX Ethernet Switch with 4-Port 802.3at PoE+ |
