Description
— Macro Bending Measurement
Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper.
— Tone Identification
Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber.
— Build in VFL Function
The output power of TC-14 Optical Fiber Identifier is 10 mW.
— Low Battery Monitoring Function
When battery power is insufficient, the low battery LED will remind users to change batteries.
| Fiber Identifier Function (Basic) | ||
| Wave Respond | 800nm~1700nm | |
| Pass Through Insertion Loss | 250um fiber | 1.0dB |
| 900um fiber | 1.0dB | |
| 3mm fiber | 2.0dB | |
| Application Fiber | 250um/900um/2.5um/3mm optical fiber | |
| Identified Signal Type | 270Hz/1KHz/2KHz | |
| Identification of Modulated Signals | YES |  |
| Power Measurement | YES | |
| Display | LED segment | |
| Tone | YES | |
| Low Power Monitoring | YES | |
| Detector Type | 1mm InGaAs | |
| Minimum Detection Power
Test Conditions: 250umOptical fiber 900umOptical fiber 3mmOptical fiber
Test Conditions: 250umOptical fiber 900umOptical fiber 3mmOptical fiber |
1550nm -35dBm -35dBm -30dBm
1310nm -30dBm -30dBm -25dBm |
|
| VFL Function (Standard) | ||
| Wavelength | 650nm±10nm | |
| VFL Output Power | 10mw | |
| Mode | CW, 1Hz, 2Hz | |
| Fiber Type | SM/MM | |
| Adapter | 2.5MM Universal | |
| General Parameters | ||
| Power Supply | 2*AA 1.5V Alkaline Battery | |
| Battery Working Time | ≥ 5000 times of measurements | |
| Working Temperature | -10℃ ~ +50℃ | |
| Storage Temperature | -20℃ ~ +70℃ | |
| Dimension | 230mm x 43mm x 36mm | |
| Weight | 200g | |
PACKAGING LIST
